成功案例
     成功案例
     新闻事件
     展会动态
     职业机会
Successful Cases: Splash Guard 先锐成功案例—挡泥板

 

应用案例(Application):挡泥板  Splash guard
材料(Resin):PP
重量(Weight):1100g*2
颜色(Color):黑色 Black
平均壁厚(Wall Thickness):1.8-2.5mm
系统(System Type):EMS 41 VE
热咀点数(Nozzle Qty):22
型腔数(Cavity):2


说明 Description:  

  1、根据产品表面形状设计斜热咀进胶方式,解决了传统的直进胶再转冷流道进胶存在的料把,减少产品加工工序,提供了生产效率、节约成本; 

   We design the gate ways of oblique nozzle according to the surface shape of products,which solves the traditional straight gate ways and then turn to the cool runner gate ways which will degraded materials.Besides,it can decrease the manufacturing procedures of products and improve the production efficiency and cost saving.

  2、EMS系统为整体式系统,安装、拆卸方便快捷;热流与分流板采用螺牙式连接,热流道系统与模具接触少,热量损失少同时避免漏胶风险;油路、水路采用铁氟龙管连接,模具设计简单,加工方便;
 

 EMS system is unitary system, it convenient for assembly and disassembly.The hot runner and manifold adopt screw type connecting.Hot runner system is less contact with mold,so it has less heat loss,at the same time,it can avoid leaking risks.Oiling channel and cooling channel adopt Teflon pipe to connect.The mold design is simple and convenient for machine.

 

  3、油缸采用新款加强密封性能的串油油缸,使油缸内的油达到一个循环冷却的效果,同时可对油缸内部进行清洗,避免油缸内的油长时间积累,高温、变性,产生杂质和气泡等,影响油缸工作性能;保证活塞平稳运动,系统稳定性强;

   Hydraulic cylinder adopts the new style and seal strengthening performance hydraulic cylinder,which can make the oil in the hydraulic cylinder reach a circulating cooling effect. At the same time, it can clean the inner hydraulic cylinder to avoid  the oil long time accumulate in the hydraulic cylinder, denaturation caused by the high temperature, generate impurity and bubble,which effect the working performance of hydraulic cylinder.This kind of hydraulic cylinder can ensure the piston move smoothly and the system has strong stability.


 


 

Get the Flash Player to see this player.
 
 
 

 

 
版权所有© 先锐模具配件(东莞)有限公司粤ICP备17105487号